Fiberland
Request a Quote
10G Duplex XFP

10G XFP Duplex 1310nm 10km

Rate10GReach10kmWavelength1310InterfaceDUPLEX LC
Fiberland part number
FLD-XFP-LR
Unit price32.00USD / piece
Request a Quote Review Specifications
At a glance

Key Specifications

Select a specification to see how it affects model selection.

View complete table
Form TypeXFP

Check this recorded value against the target device and project requirements before quotation approval.

Model data

Technical Specifications

Filter the product record by the information needed for engineering or purchasing review.

14 specifications shown
Fiberland Part NumberFLD-XFP-LRVendor NameFIBERLAND
Data Rate10GWavelength1310
Reach10kmForm TypeXFP
Optical InterfaceDUPLEX LCDDM SupportYES
Commercial Temp.0~70℃Industrial Temp.-40~85℃
Compatible BrandsCisco,Huawei,Nvidia...200+ brandsComplianceCE,FCC,ROHS,REACH
Warranty3 YearsModeSM
Compatible model reference

Product Compatibility Mapping

Cross-reference the original manufacturer part number with the corresponding Fiberland part number before confirming the target device and firmware.

Search Full Compatibility Database
Verified cross-references13 manufacturer part numbersAcross 6 brands
Showing 8 of 13 verified matches

Swipe horizontally to view every field.

Original part numberBrandFiberland part numberProduct description
XFP-10GLR-OC192SRCISCOFLD-XFP-LRCisco multirate 10GBASE-LR/OC-192 XFP transceiver, 1310 nm, 10 km for 10 Gigabit Ethernet over G.652 single-mode fiber, dual LC, with digital optical monitoring.
XFP10GLR-192SR-LCISCOFLD-XFP-LRCisco multirate 10GBASE-LR/OC-192 XFP transceiver, 1310 nm, 10 km for 10 Gigabit Ethernet over G.652 single-mode fiber, dual LC, with digital optical monitoring.
XFP10GLR192SR-RGDCISCOFLD-XFP-LRCisco multirate 10GBASE-LR/OC-192 XFP transceiver, 1310 nm, 10 km for 10 Gigabit Ethernet over G.652 single-mode fiber, dual LC, with digital optical monitoring.
XFP-10GE-LRJUNIPERFLD-XFP-LRJuniper 10GBASE-LR XFP transceiver, 1310 nm, 10 km over 9/125 µm single-mode fiber, LC connector.
XFP-10G-L-OC192-SR1JUNIPERFLD-XFP-LRJuniper 10GBASE-LR XFP transceiver, 1310 nm, 10 km over 9/125 µm single-mode fiber, LC connector.
EX-XFP-10GE-LRJUNIPERFLD-XFP-LRJuniper 10GBASE-LR XFP transceiver, 1310 nm, 10 km over single-mode fiber, duplex LC/PC/UPC, with digital optical monitoring.
SRX-XFP-10GE-LRJUNIPERFLD-XFP-LRJuniper 10GBASE-LR XFP transceiver, 1310 nm, 10 km over single-mode fiber, duplex LC/PC/UPC, with digital optical monitoring.
XFP-LX-SM1310H3CFLD-XFP-LRH3C 10G XFP transceiver, 1310 nm, 10 km over 9/125 µm single-mode fiber, LC connector.

A part-number cross-reference is a model-selection starting point, not a blanket device guarantee. Final fit depends on the exact device, firmware or OS, target port and requested coding profile.

Link and application reference

See Where This Product Fits in the Network

Review common data-center, DCI, campus, server and metro-network connections before confirming speed, reach, fiber type and connector.

Application planning

Optical Transceiver Application and Link Map

Compare representative network topologies and link paths to identify the appropriate product family for the intended deployment.

View full application diagram
Optical transceiver application diagram covering data center, DCI, campus, server and metro networks
Testing and quality reference

Review the Quality-Control and Test Flow

Follow the checkpoints used to verify materials, firmware, optical performance, temperature stability, compatibility and final inspection.

Testing and quality

Quality Control and Test Flow

Review the sequence from material verification and firmware programming through optical, temperature, compatibility and final QA inspection.

View full testing diagram
Quality control flow covering material, firmware, optical, temperature, compatibility and final QA checks
Product FAQ

Frequently Asked Questions

Answers to common compatibility, installation and troubleshooting questions.

Can different transceiver brands be used at opposite ends of a fiber link?

Yes. The transceivers do not normally need to be from the same manufacturer. Their Ethernet standard, wavelength, fiber type, lane configuration, reach, and other link requirements must be compatible.

Why is there no TX optical power from the compatible transceiver?

Check whether the port is administratively enabled and whether the host has disabled the transmitter because of an unsupported-module condition or configuration issue. If the module is correctly recognized and enabled, further hardware testing may be required.

Are compatible transceivers suitable for enterprise networks?

Yes. They can be used in enterprise switching, routing, storage, campus networks, and other applications when properly matched to the network equipment and link requirements.

What does an “unsupported transceiver” message mean?

It usually means the host device does not recognize or approve the identification information stored in the module. It does not necessarily indicate an optical failure.

Why is the transceiver recognized but DDM/DOM information is missing?

The module may be recognized while diagnostic monitoring is not fully supported by the host platform or compatibility profile. Check whether both the transceiver and network device support DDM/DOM for that interface.

Request a quote

Tell Us What Your Project Needs

Engineering resources

Technical proof for faster project review

Move from model selection to internal approval with the documents, compatibility checks and verification paths buyers use most.