Electrical Interface
Specify Ethernet speed, copper connector and the equipment connected at the electrical side.
Copper and fiber conversion
Fiber Media Converters
Plan copper-to-fiber and fiber-to-fiber conversion by Ethernet speed, fiber mode, wavelength, reach and operating environment.
Primary taskCopper-to-fiberKey inputsSpeed + reachAvailabilityConfirm by RFQ
Application routes
Where Conversion Is Needed
Start from the two interfaces that cannot connect directly. The converter sits between them.
010203
Copper-to-Fiber Extension
Extend an Ethernet link beyond copper distance limits by matching the electrical and optical interfaces.
Network Application Review
Check where a converter fits in access, campus, industrial or edge network links.
Configuration Request
Submit both interfaces, speed, fiber type, distance, power input and installation environment.
Connection map
Define Both Sides of the Link
A useful converter request describes the electrical side, the optical side and the installation conditions as one connection.
Request a ConfigurationOptical Interface
Include fiber mode, connector, wavelength and whether the link is simplex or duplex.
Distance and Environment
Share the link distance and whether the converter will operate in an office, cabinet or industrial environment.
Power and Installation
Confirm the available power input, mounting method and quantity before requesting pricing.
Technical resources
Converter Guides and Engineering Support
Transceiver vs Media ConverterUnderstand the functional difference before selecting the network architecture.
Testing and QualityReview the quality-control path and request supporting evidence for a project.
Engineering QuestionAsk Fiberland to review both link interfaces, operating conditions and project constraints.
Engineering resources
Technical proof for faster project review
Move from model selection to internal approval with the documents, compatibility checks and verification paths buyers use most.
01Technical filesDatasheets
Find model-level specifications, drawings and selection documents before internal review.
Find datasheets
02Device fitCompatibility
Review device, firmware and coding fit before specifying a module for your network.
Check compatibility
03VerificationTesting & QC
See optical, functional and pre-shipment checks used to verify product performance.
Review testing
04Project approvalCompliance
Review certification routes and request supporting documents for project approval.
View documentsProject support
Confirm the right media converter configuration
Send both interfaces, speed, fiber mode, distance, power and installation conditions for a model recommendation and quotation.