Fiberland
Request a Quote
25G SFP28 DAC

25G SFP28 Direct Attach Copper Cable 1m | FLD-SFP28-DAC-1M | Fiberland

25G SFP28 TO SFP28 DAC 1m

Rate25GReach1mWavelength-Interface-
Fiberland part number
FLD-SFP28-DAC-1M
Unit priceAsk Our Manager
Request a Quote Review Specifications
At a glance

Key Specifications

Select a specification to see how it affects model selection.

View complete table
Form TypeSFP28

Check this recorded value against the target device and project requirements before quotation approval.

Model data

Technical Specifications

Filter the product record by the information needed for engineering or purchasing review.

14 specifications shown
Fiberland Part NumberFLD-SFP28-DAC-1MVendor NameFIBERLAND
Data Rate25GWavelength-
Reach1mForm TypeSFP28
Optical Interface-DDM Support-
Commercial Temp.0~70℃Industrial Temp.-
Compatible BrandsCisco,Huawei,Nvidia...200+ brandsComplianceCE,FCC,ROHS,REACH
Warranty3 YearsMode-
Compatible model reference

Product Compatibility Mapping

Cross-reference the original manufacturer part number with the corresponding Fiberland part number before confirming the target device and firmware.

Search Full Compatibility Database
Verified cross-references12 manufacturer part numbersAcross 7 brands
Showing 8 of 12 verified matches

Swipe horizontally to view every field.

Original part numberBrandFiberland part numberProduct description
SFP-H25G-CU1MCISCOFLD-SFP28-DAC-1M25G SFP28 to SFP28 passive direct-attach copper cable, 1 m.
CAB-S-S-25G-1MARISTAFLD-SFP28-DAC-1M25G SFP28 to SFP28 passive direct-attach copper cable, 1 m.
JNP-SFP-25G-DAC-1MJUNIPERFLD-SFP28-DAC-1M25G SFP28 to SFP28 passive direct-attach copper cable, 1 m.
720-084604JUNIPERFLD-SFP28-DAC-1M25G SFP28 to SFP28 passive direct-attach copper cable, 1 m.
MCP2M00-A001NVIDIAFLD-SFP28-DAC-1M25G SFP28 to SFP28 passive direct-attach copper cable, 1 m.
MCP2M00-A001E30NNVIDIAFLD-SFP28-DAC-1M25G SFP28 to SFP28 passive direct-attach copper cable, 1 m.
R4G19AHPEFLD-SFP28-DAC-1M25G SFP28 to SFP28 passive direct-attach copper cable, 1 m.
SFP-25G-D-CAB-1MH3CFLD-SFP28-DAC-1M25G SFP28 to SFP28 passive direct-attach copper cable, 1 m.

A part-number cross-reference is a model-selection starting point, not a blanket device guarantee. Final fit depends on the exact device, firmware or OS, target port and requested coding profile.

Link and application reference

See Where This Product Fits in the Network

Review common data-center, DCI, campus, server and metro-network connections before confirming speed, reach, fiber type and connector.

Application planning

Optical Transceiver Application and Link Map

Compare representative network topologies and link paths to identify the appropriate product family for the intended deployment.

View full application diagram
Optical transceiver application diagram covering data center, DCI, campus, server and metro networks
Testing and quality reference

Review the Quality-Control and Test Flow

Follow the checkpoints used to verify materials, firmware, optical performance, temperature stability, compatibility and final inspection.

Testing and quality

Quality Control and Test Flow

Review the sequence from material verification and firmware programming through optical, temperature, compatibility and final QA inspection.

View full testing diagram
Quality control flow covering material, firmware, optical, temperature, compatibility and final QA checks
Product FAQ

Frequently Asked Questions

Answers to common compatibility, installation and troubleshooting questions.

Do compatible transceivers support hot swapping?

Most SFP-family, QSFP-family, and similar pluggable transceivers are designed for hot-pluggable operation according to the applicable interface specification. Host-equipment procedures should still be followed.

What does an “unsupported transceiver” message mean?

It usually means the host device does not recognize or approve the identification information stored in the module. It does not necessarily indicate an optical failure.

Why does my switch show an “unsupported transceiver” warning?

Some network devices validate vendor information stored in the transceiver EEPROM. If the module's coding is not recognized by the host platform, the switch may display an unsupported or non-certified transceiver warning.

What information does DDM/DOM provide?

DDM/DOM can provide real-time information such as module temperature, supply voltage, transmit optical power, receive optical power, and laser bias current.

Why does my compatible transceiver keep losing and restoring the link?

Intermittent links can be caused by marginal optical power, dirty connectors, unstable fiber connections, FEC mismatches, port configuration, temperature, or compatibility issues. Check both the optical link and host-side configuration.

Request a quote

Tell Us What Your Project Needs

Engineering resources

Technical proof for faster project review

Move from model selection to internal approval with the documents, compatibility checks and verification paths buyers use most.