Fiberland
Request a Quote
10G DUPLEX SFP+

10G SFP+ ZR Fiber Optic Transceiver Module 1550nm 80km Duplex LC SMF DDM | FLD-SFP+ZR | Fiberland

10G SFP+ Duplex 1550nm 80km

Rate10GReach80kmWavelength1550InterfaceDUPLEX LC
Fiberland part number
FLD-SFP+ZR
Unit price80.00USD / piece
Request a Quote Review Specifications
At a glance

Key Specifications

Select a specification to see how it affects model selection.

View complete table
Form TypeSFP+

Check this recorded value against the target device and project requirements before quotation approval.

Model data

Technical Specifications

Filter the product record by the information needed for engineering or purchasing review.

14 specifications shown
Fiberland Part NumberFLD-SFP+ZRVendor NameFIBERLAND
Data Rate10GWavelength1550
Reach80kmForm TypeSFP+
Optical InterfaceDUPLEX LCDDM SupportYES
Commercial Temp.0~70℃Industrial Temp.-40~85℃
Compatible BrandsCisco,Huawei,Nvidia...200+ brandsComplianceCE,FCC,ROHS,REACH
Warranty3 YearsModeSM
Compatible model reference

Product Compatibility Mapping

Cross-reference the original manufacturer part number with the corresponding Fiberland part number before confirming the target device and firmware.

Search Full Compatibility Database
Verified cross-references22 manufacturer part numbersAcross 12 brands
Showing 8 of 22 verified matches

Swipe horizontally to view every field.

Original part numberBrandFiberland part numberProduct description
SFP-10G-ZRCISCOFLD-SFP+ZR10GBASE-ZR SFP+ transceiver, 1550 nm, 80 km over single-mode fiber, duplex LC.
SFP-10G-ZR-SCISCOFLD-SFP+ZR10GBASE-ZR SFP+ transceiver, 1550 nm, 80 km over single-mode fiber, duplex LC.
SFP-10G-ZR-ICISCOFLD-SFP+ZR10GBASE-ZR SFP+ transceiver, 1550 nm, 80 km over single-mode fiber, duplex LC.
SFP-10G-ZRARISTAFLD-SFP+ZR10GBASE-ZR SFP+ transceiver, 1550 nm, 80 km over single-mode fiber, duplex LC.
EX-SFP-10GE-ZRJUNIPERFLD-SFP+ZR10GBASE-ZR SFP+ transceiver, 1550 nm, 80 km over single-mode fiber, duplex LC.
SFPP-10GE-ZRJUNIPERFLD-SFP+ZR10GBASE-ZR SFP+ transceiver, 1550 nm, 80 km over single-mode fiber, duplex LC.
SFPP-10GE-ZR-ITJUNIPERFLD-SFP+ZR10GBASE-ZR SFP+ transceiver, 1550 nm, 80 km over single-mode fiber, duplex LC.
10310EXTREME NETWORKSFLD-SFP+ZR10GBASE-ZR SFP+ transceiver, 1550 nm, 80 km over single-mode fiber, duplex LC.

A part-number cross-reference is a model-selection starting point, not a blanket device guarantee. Final fit depends on the exact device, firmware or OS, target port and requested coding profile.

Link and application reference

See Where This Product Fits in the Network

Review common data-center, DCI, campus, server and metro-network connections before confirming speed, reach, fiber type and connector.

Application planning

Optical Transceiver Application and Link Map

Compare representative network topologies and link paths to identify the appropriate product family for the intended deployment.

View full application diagram
Optical transceiver application diagram covering data center, DCI, campus, server and metro networks
Testing and quality reference

Review the Quality-Control and Test Flow

Follow the checkpoints used to verify materials, firmware, optical performance, temperature stability, compatibility and final inspection.

Testing and quality

Quality Control and Test Flow

Review the sequence from material verification and firmware programming through optical, temperature, compatibility and final QA inspection.

View full testing diagram
Quality control flow covering material, firmware, optical, temperature, compatibility and final QA checks
Product FAQ

Frequently Asked Questions

Answers to common compatibility, installation and troubleshooting questions.

Can compatible transceivers be used with existing fiber cabling?

Yes, provided the module's fiber requirements match the installed cabling, including single-mode or multimode fiber, connector type, wavelength, and supported transmission distance.

Why does the switch report a vendor or part number different from the physical transceiver label?

Compatible transceivers may contain programmed identification information required by the host platform. The vendor or part number reported by the switch can therefore differ from the manufacturer's physical product label.

Why does a high-speed compatible transceiver show FEC errors?

FEC errors may result from incompatible FEC settings, excessive optical loss, signal-quality problems, incorrect fiber infrastructure, or incompatible link parameters. Verify that both ends use the required FEC mode for the interface.

Will a compatible transceiver be recognized by my switch?

A correctly coded compatible transceiver should be recognized by the supported switch or router platform. Compatibility can depend on the device model, operating system, firmware version, and port configuration.

Will compatible transceivers work after a switch firmware upgrade?

They often do, but firmware changes can modify transceiver validation behavior. Compatibility should therefore be verified when deploying modules on newly updated network operating systems.

Request a quote

Tell Us What Your Project Needs

Engineering resources

Technical proof for faster project review

Move from model selection to internal approval with the documents, compatibility checks and verification paths buyers use most.