Fiberland
Request a Quote
100G DUPLEX QSFP28

100G QSFP28 ZR4 1310nm 80km

Rate100GReach80kmWavelength1310InterfaceLC
Fiberland part number
FLD-QSFP28-ZR4
Unit price850.00USD / piece
Request a Quote Review Specifications
At a glance

Key Specifications

Select a specification to see how it affects model selection.

View complete table
Form TypeQSFP28

Check this recorded value against the target device and project requirements before quotation approval.

Model data

Technical Specifications

Filter the product record by the information needed for engineering or purchasing review.

14 specifications shown
Fiberland Part NumberFLD-QSFP28-ZR4Vendor NameFIBERLAND
Data Rate100GWavelength1310
Reach80kmForm TypeQSFP28
Optical InterfaceLCDDM SupportYES
Commercial Temp.0~70℃Industrial Temp.-40~85℃
Compatible BrandsCisco,Huawei,Nvidia...200+ brandsComplianceCE,FCC,ROHS,REACH
Warranty3 YearsModeSM
Compatible model reference

Product Compatibility Mapping

Cross-reference the original manufacturer part number with the corresponding Fiberland part number before confirming the target device and firmware.

Search Full Compatibility Database
Verified cross-references7 manufacturer part numbersAcross 5 brands
Showing 7 of 7 verified matches

Swipe horizontally to view every field.

Original part numberBrandFiberland part numberProduct description
QSFP-100G-ZR4-SCISCOFLD-QSFP28-ZR4100GBASE-ZR4 QSFP28 transceiver, LAN-WDM 1310 nm band, 80 km over duplex single-mode fiber, LC, with digital diagnostics.
QSFP-100G-ZR4ARISTAFLD-QSFP28-ZR4100GBASE-ZR4 QSFP28 transceiver, LAN-WDM 1310 nm band, 80 km over duplex single-mode fiber, LC, with digital diagnostics.
QSFP-100G-ZR4JUNIPERFLD-QSFP28-ZR4100GBASE-ZR4 QSFP28 transceiver, LAN-WDM 1310 nm band, 80 km over duplex single-mode fiber, LC, with digital diagnostics.
740-120240JUNIPERFLD-QSFP28-ZR4100GBASE-ZR4 QSFP28 transceiver, LAN-WDM 1310 nm band, 80 km over duplex single-mode fiber, LC, with digital diagnostics.
QSFP-100G-ZR4-WDM1300H3CFLD-QSFP28-ZR4100GBASE-ZR4 QSFP28 transceiver, LAN-WDM 1310 nm band, 80 km over duplex single-mode fiber, LC, with digital diagnostics.
SO-QSFP28-ZR4SMARTOPTICSFLD-QSFP28-ZR4100GBASE-ZR4 QSFP28 transceiver, LAN-WDM 1310 nm band, 80 km over duplex single-mode fiber, LC, with digital diagnostics.
QSFP-100G-ZR4-SOSMARTOPTICSFLD-QSFP28-ZR4100GBASE-ZR4 QSFP28 transceiver, LAN-WDM 1310 nm band, 80 km over duplex single-mode fiber, LC, with digital diagnostics.

A part-number cross-reference is a model-selection starting point, not a blanket device guarantee. Final fit depends on the exact device, firmware or OS, target port and requested coding profile.

Link and application reference

See Where This Product Fits in the Network

Review common data-center, DCI, campus, server and metro-network connections before confirming speed, reach, fiber type and connector.

Application planning

Optical Transceiver Application and Link Map

Compare representative network topologies and link paths to identify the appropriate product family for the intended deployment.

View full application diagram
Optical transceiver application diagram covering data center, DCI, campus, server and metro networks
Testing and quality reference

Review the Quality-Control and Test Flow

Follow the checkpoints used to verify materials, firmware, optical performance, temperature stability, compatibility and final inspection.

Testing and quality

Quality Control and Test Flow

Review the sequence from material verification and firmware programming through optical, temperature, compatibility and final QA inspection.

View full testing diagram
Quality control flow covering material, firmware, optical, temperature, compatibility and final QA checks
Product FAQ

Frequently Asked Questions

Answers to common compatibility, installation and troubleshooting questions.

Why is the transceiver recognized but DDM/DOM information is missing?

The module may be recognized while diagnostic monitoring is not fully supported by the host platform or compatibility profile. Check whether both the transceiver and network device support DDM/DOM for that interface.

How should I troubleshoot a compatible transceiver that is not recognized?

Confirm the module part number and compatibility profile, reseat the module, inspect the port status, check device logs, verify the operating-system version, and compare the module information reported by the host.

Is FEC important when using high-speed compatible transceivers?

Yes. Forward Error Correction is an important consideration for many 25G, 50G, 100G, 200G, 400G, and 800G interfaces. Both ends of the link must use compatible FEC and interface settings.

Can OEM and compatible transceivers be used in the same switch?

In many networks, OEM and compatible transceivers are deployed in different ports of the same device. Each module should meet the requirements of its individual interface.

Can compatible transceivers be reprogrammed?

Absolutely! All of our transceivers can be easily reprogrammed using our standalone offline coding kit. To get started, please share the part number, description, and serial number of your current transceivers, as well as the brands you need them to work with. Our team will generate the corresponding .bin file and send it over with clear instructions so you can update your transceivers immediately.

Request a quote

Tell Us What Your Project Needs

Engineering resources

Technical proof for faster project review

Move from model selection to internal approval with the documents, compatibility checks and verification paths buyers use most.