Fiberland
Request a Quote
10/100/1000M MEDIA CONVERTER

10/100/1000M Duplex Fiber Media Converter 1310nm 20km SC/ST/FC SMF | FLD-MC-ASGE-DU-SM-20 | Fiberland

Rate10/100/1000MReach20kmWavelength1310InterfaceSC/ST/FC
Fiberland part number
FLD-MC-ASGE-DU-SM-20
Unit priceAsk Our Manager
Request a Quote Review Specifications
At a glance

Key Specifications

Select a specification to see how it affects model selection.

View complete table
Form TypeDuplex

Check this recorded value against the target device and project requirements before quotation approval.

Model data

Technical Specifications

Filter the product record by the information needed for engineering or purchasing review.

14 specifications shown
Fiberland Part NumberFLD-MC-ASGE-DU-SM-20Vendor NameFIBERLAND
Data Rate10/100/1000MWavelength1310
Reach20kmForm TypeDuplex
Optical InterfaceSC/ST/FCDDM SupportIron
Commercial Temp.0~70℃Industrial Temp.N/A
Compatible BrandsEURO/UK/US/AUSComplianceCE,FCC,ROHS,REACH
Warranty3 YearsModeSM
Compatible model reference

Product Compatibility Mapping

Cross-reference the original manufacturer part number with the corresponding Fiberland part number before confirming the target device and firmware.

Search Full Compatibility Database
Verified cross-references5 manufacturer part numbersAcross 4 brands
Showing 5 of 5 verified matches

Swipe horizontally to view every field.

Original part numberBrandFiberland part numberProduct description
MC210CSTP-LINKFLD-MC-ASGE-DU-SM-2010/100/1000BASE-T to 1000BASE-LX media converter, 1310 nm duplex SC SMF, 20 km.
DMC-G2000SCD-LINKFLD-MC-ASGE-DU-SM-2010/100/1000BASE-T to 1000BASE-LX media converter, 1310 nm duplex SC SMF, 20 km.
GT-802SPLANETFLD-MC-ASGE-DU-SM-2010/100/1000BASE-T to 1000BASE-LX media converter, 1310 nm duplex SC SMF, 20 km.
GST-802SPLANETFLD-MC-ASGE-DU-SM-2010/100/1000BASE-T to 1000BASE-LX media converter, 1310 nm duplex SC SMF, 20 km.
AT-MMC2000LX/SC-960ALLIED TELESISFLD-MC-ASGE-DU-SM-2010/100/1000BASE-T to 1000BASE-LX media converter, 1310 nm duplex SC SMF, 20 km.

A part-number cross-reference is a model-selection starting point, not a blanket device guarantee. Final fit depends on the exact device, firmware or OS, target port and requested coding profile.

Link and application reference

See Where This Product Fits in the Network

Review common data-center, DCI, campus, server and metro-network connections before confirming speed, reach, fiber type and connector.

Application planning

Optical Transceiver Application and Link Map

Compare representative network topologies and link paths to identify the appropriate product family for the intended deployment.

View full application diagram
Optical transceiver application diagram covering data center, DCI, campus, server and metro networks
Testing and quality reference

Review the Quality-Control and Test Flow

Follow the checkpoints used to verify materials, firmware, optical performance, temperature stability, compatibility and final inspection.

Testing and quality

Quality Control and Test Flow

Review the sequence from material verification and firmware programming through optical, temperature, compatibility and final QA inspection.

View full testing diagram
Quality control flow covering material, firmware, optical, temperature, compatibility and final QA checks
Product FAQ

Frequently Asked Questions

Answers to common compatibility, installation and troubleshooting questions.

Will a compatible transceiver be recognized by my switch?

A correctly coded compatible transceiver should be recognized by the supported switch or router platform. Compatibility can depend on the device model, operating system, firmware version, and port configuration.

What is EEPROM coding in an optical transceiver?

EEPROM coding stores identification and operating information such as vendor data, part number, wavelength, interface characteristics, and other parameters read by the host equipment.

Does using compatible optics affect transmission distance?

Compatibility coding itself does not determine transmission distance. Reach is primarily determined by the optical specification, fiber type, wavelength, link loss, connector quality, and network design.

Are compatible transceivers suitable for telecom networks?

Compatible modules can be used in telecom and service-provider environments when they meet the required optical specifications, environmental requirements, protocols, and host compatibility.

Why is the transceiver recognized but DDM/DOM information is missing?

The module may be recognized while diagnostic monitoring is not fully supported by the host platform or compatibility profile. Check whether both the transceiver and network device support DDM/DOM for that interface.

Request a quote

Tell Us What Your Project Needs

Engineering resources

Technical proof for faster project review

Move from model selection to internal approval with the documents, compatibility checks and verification paths buyers use most.