Fiberland
Request a Quote
1G COPPER SFP

100M SFP Copper Transceiver Module 100m RJ45 | FLD-M-T | Fiberland

100M COPPER SFP TRANSCEIVER 100M

Rate100MReach100mWavelength-InterfaceRJ45
Fiberland part number
FLD-M-T
Unit price9.00USD / piece
Request a Quote Review Specifications
At a glance

Key Specifications

Select a specification to see how it affects model selection.

View complete table
Form TypeSFP COPPER

Check this recorded value against the target device and project requirements before quotation approval.

Model data

Technical Specifications

Filter the product record by the information needed for engineering or purchasing review.

14 specifications shown
Fiberland Part NumberFLD-M-TVendor NameFIBERLAND
Data Rate100MWavelength-
Reach100mForm TypeSFP COPPER
Optical InterfaceRJ45DDM Support-
Commercial Temp.0~70℃Industrial Temp.-40~85℃
Compatible BrandsCisco,Huawei,Nvidia...200+ brandsComplianceCE,FCC,ROHS,REACH
Warranty3 YearsMode-
Compatible model reference

Product Compatibility Mapping

Cross-reference the original manufacturer part number with the corresponding Fiberland part number before confirming the target device and firmware.

Search Full Compatibility Database
Verified cross-references12 manufacturer part numbersAcross 4 brands
Showing 8 of 12 verified matches

Swipe horizontally to view every field.

Original part numberBrandFiberland part numberProduct description
GLC-TCISCOFLD-M-T10/100/1000BASE-T copper SFP transceiver with RJ45 interface for links up to 100 m over Category 5e or better cable.
GLC-TECISCOFLD-M-T10/100/1000BASE-T copper SFP transceiver with RJ45 interface for links up to 100 m over Category 5e or better cable.
SFP-GE-TCISCOFLD-M-T10/100/1000BASE-T copper SFP transceiver with RJ45 interface for links up to 100 m over Category 5e or better cable.
ONS-SE-ZE-EL=CISCOFLD-M-T10/100/1000BASE-T copper SFP transceiver with RJ45 interface for links up to 100 m over Category 5e or better cable.
EX-SFP-1GE-TJUNIPERFLD-M-T10/100/1000BASE-T copper SFP transceiver with RJ45 interface for links up to 100 m over Category 5e or better cable.
S-RJ01MIKROTIKFLD-M-T10/100/1000BASE-T copper SFP transceiver with RJ45 interface for links up to 100 m over Category 5e or better cable.
J8177DHPFLD-M-T10/100/1000BASE-T copper SFP transceiver with RJ45 interface for links up to 100 m over Category 5e or better cable.
J8177EHPFLD-M-T10/100/1000BASE-T copper SFP transceiver with RJ45 interface for links up to 100 m over Category 5e or better cable.

A part-number cross-reference is a model-selection starting point, not a blanket device guarantee. Final fit depends on the exact device, firmware or OS, target port and requested coding profile.

Link and application reference

See Where This Product Fits in the Network

Review common data-center, DCI, campus, server and metro-network connections before confirming speed, reach, fiber type and connector.

Application planning

Optical Transceiver Application and Link Map

Compare representative network topologies and link paths to identify the appropriate product family for the intended deployment.

View full application diagram
Optical transceiver application diagram covering data center, DCI, campus, server and metro networks
Testing and quality reference

Review the Quality-Control and Test Flow

Follow the checkpoints used to verify materials, firmware, optical performance, temperature stability, compatibility and final inspection.

Testing and quality

Quality Control and Test Flow

Review the sequence from material verification and firmware programming through optical, temperature, compatibility and final QA inspection.

View full testing diagram
Quality control flow covering material, firmware, optical, temperature, compatibility and final QA checks
Product FAQ

Frequently Asked Questions

Answers to common compatibility, installation and troubleshooting questions.

Why does the transceiver work after reinserting it?

Reinserting a module forces the host to redetect and reinitialize the transceiver. If this repeatedly resolves the issue, inspect the port, module contacts, firmware behavior, and compatibility profile rather than assuming the optical link itself is faulty.

Can one optical transceiver be compatible with multiple brands?

Yes. The same optical hardware may support multiple equipment brands when it is programmed with the appropriate compatibility profile. Multi-vendor coding options may also be available for certain applications.

Why is EEPROM programming important for compatibility?

Network equipment may inspect the module's EEPROM information before allowing normal operation. Correct programming helps the host identify and manage the transceiver properly.

Do both ends of an optical link need the same OEM compatibility?

No. Each transceiver generally needs to be compatible with the equipment in which it is installed. For example, one end may be coded for one switch brand and the other end for another.

How can I verify compatibility before ordering?

Check the network-device manufacturer and model, port type, required data rate, OEM transceiver reference if available, wavelength, reach, connector, fiber type, and software or firmware version when relevant.

Request a quote

Tell Us What Your Project Needs

Engineering resources

Technical proof for faster project review

Move from model selection to internal approval with the documents, compatibility checks and verification paths buyers use most.