Fiberland
Request a Quote
100G CFP2

100G CFP2 ER4 Fiber Optic Transceiver Module 1310nm 40km LC SMF DDM | FLD-CFP2-ER4 | Fiberland

100G CFP2 1310nm 40km

Rate100GReach40kmWavelength1310InterfaceLC
Fiberland part number
FLD-CFP2-ER4
Unit price2,200.00USD / piece
Request a Quote Review Specifications
At a glance

Key Specifications

Select a specification to see how it affects model selection.

View complete table
Form TypeCFP2

Check this recorded value against the target device and project requirements before quotation approval.

Model data

Technical Specifications

Filter the product record by the information needed for engineering or purchasing review.

14 specifications shown
Fiberland Part NumberFLD-CFP2-ER4Vendor NameFIBERLAND
Data Rate100GWavelength1310
Reach40kmForm TypeCFP2
Optical InterfaceLCDDM SupportYES
Commercial Temp.0~70℃Industrial Temp.-
Compatible BrandsCisco,Huawei,Nvidia...200+ brandsComplianceCE,FCC,ROHS,REACH
Warranty3 YearsModeSM
Compatible model reference

Product Compatibility Mapping

Cross-reference the original manufacturer part number with the corresponding Fiberland part number before confirming the target device and firmware.

Search Full Compatibility Database
Verified cross-references7 manufacturer part numbersAcross 3 brands
Showing 7 of 7 verified matches

Swipe horizontally to view every field.

Original part numberBrandFiberland part numberProduct description
SO-CFP2-ER4SMARTOPTICSFLD-CFP2-ER4100GBASE-ER4 CFP2 transceiver, LAN-WDM 1310 nm band, 40 km over duplex single-mode fiber, LC, with digital diagnostics.
CFP2-100GBASE-ER4JUNIPERFLD-CFP2-ER4100GBASE-ER4 CFP2 transceiver, LAN-WDM 1310 nm band, 40 km over duplex single-mode fiber, LC, with digital diagnostics.
740-059311JUNIPERFLD-CFP2-ER4100GBASE-ER4 CFP2 transceiver, LAN-WDM 1310 nm band, 40 km over duplex single-mode fiber, LC, with digital diagnostics.
CFP2-100G-ER4-DJUNIPERFLD-CFP2-ER4100GBASE-ER4 CFP2 transceiver, LAN-WDM 1310 nm band, 40 km over duplex single-mode fiber, LC, with digital diagnostics.
740-059312JUNIPERFLD-CFP2-ER4100GBASE-ER4 CFP2 transceiver, LAN-WDM 1310 nm band, 40 km over duplex single-mode fiber, LC, with digital diagnostics.
100G-CFP2-ER4-40KMBROCADEFLD-CFP2-ER4100GBASE-ER4 CFP2 transceiver, LAN-WDM 1310 nm band, 40 km over duplex single-mode fiber, LC, with digital diagnostics.
57-1000328-01BROCADEFLD-CFP2-ER4100GBASE-ER4 CFP2 transceiver, LAN-WDM 1310 nm band, 40 km over duplex single-mode fiber, LC, with digital diagnostics.

A part-number cross-reference is a model-selection starting point, not a blanket device guarantee. Final fit depends on the exact device, firmware or OS, target port and requested coding profile.

Link and application reference

See Where This Product Fits in the Network

Review common data-center, DCI, campus, server and metro-network connections before confirming speed, reach, fiber type and connector.

Application planning

Optical Transceiver Application and Link Map

Compare representative network topologies and link paths to identify the appropriate product family for the intended deployment.

View full application diagram
Optical transceiver application diagram covering data center, DCI, campus, server and metro networks
Testing and quality reference

Review the Quality-Control and Test Flow

Follow the checkpoints used to verify materials, firmware, optical performance, temperature stability, compatibility and final inspection.

Testing and quality

Quality Control and Test Flow

Review the sequence from material verification and firmware programming through optical, temperature, compatibility and final QA inspection.

View full testing diagram
Quality control flow covering material, firmware, optical, temperature, compatibility and final QA checks
Product FAQ

Frequently Asked Questions

Answers to common compatibility, installation and troubleshooting questions.

Are compatible transceivers suitable for data centers?

Yes. Compatible optical modules are widely used for server, switch, storage, and data-center interconnect applications when the correct interface and compatibility requirements are met.

Do both ends of an optical link need the same OEM compatibility?

No. Each transceiver generally needs to be compatible with the equipment in which it is installed. For example, one end may be coded for one switch brand and the other end for another.

Can third-party transceivers damage a switch?

A properly designed transceiver that meets the required electrical, mechanical, thermal, and interface specifications should operate within the host platform's intended transceiver interface requirements.

What information does DDM/DOM provide?

DDM/DOM can provide real-time information such as module temperature, supply voltage, transmit optical power, receive optical power, and laser bias current.

Can compatible transceivers be reprogrammed?

Absolutely! All of our transceivers can be easily reprogrammed using our standalone offline coding kit. To get started, please share the part number, description, and serial number of your current transceivers, as well as the brands you need them to work with. Our team will generate the corresponding .bin file and send it over with clear instructions so you can update your transceivers immediately.

Request a quote

Tell Us What Your Project Needs

Engineering resources

Technical proof for faster project review

Move from model selection to internal approval with the documents, compatibility checks and verification paths buyers use most.