Fiberland
Request a Quote
10G BIDI SFP+

10G BiDi SFP+ ER Fiber Optic Transceiver Module TX1270/RX1330nm 60km Simplex LC SMF DDM | FLD-BIDI-SFP+ER+ | Fiberland

10G SFP+ BiDi TX1270/RX1330nm 60km

Rate10GReach60kmWavelength1270/1330InterfaceBIDI LC
Fiberland part number
FLD-BIDI-SFP+ER+
Unit price43.00USD / piece
Request a Quote Review Specifications
At a glance

Key Specifications

Select a specification to see how it affects model selection.

View complete table
Form TypeBIDI SFP+

Check this recorded value against the target device and project requirements before quotation approval.

Model data

Technical Specifications

Filter the product record by the information needed for engineering or purchasing review.

14 specifications shown
Fiberland Part NumberFLD-BIDI-SFP+ER+Vendor NameFIBERLAND
Data Rate10GWavelength1270/1330
Reach60kmForm TypeBIDI SFP+
Optical InterfaceBIDI LCDDM SupportYES
Commercial Temp.0~70℃Industrial Temp.-40~85℃
Compatible BrandsCisco,Huawei,Nvidia...200+ brandsComplianceCE,FCC,ROHS,REACH
Warranty3 YearsModeSM
Compatible model reference

Product Compatibility Mapping

Cross-reference the original manufacturer part number with the corresponding Fiberland part number before confirming the target device and firmware.

Search Full Compatibility Database
Verified cross-references3 manufacturer part numbersAcross 2 brands
Showing 3 of 3 verified matches

Swipe horizontally to view every field.

Original part numberBrandFiberland part numberProduct description
MTB-LA60PLANETFLD-BIDI-SFP+ER+10GBASE-BX SFP+ transceiver, TX 1270 nm/RX 1330 nm, 60 km over one strand of single-mode fiber, simplex LC.
MTB-TLA60PLANETFLD-BIDI-SFP+ER+10GBASE-BX SFP+ transceiver, TX 1270 nm/RX 1330 nm, 60 km over one strand of single-mode fiber, simplex LC.
TN-SFP-10G-U-60TRANSITION NETWORKSFLD-BIDI-SFP+ER+10GBASE-BX SFP+ transceiver, TX 1270 nm/RX 1330 nm, 60 km over one strand of single-mode fiber, simplex LC.

A part-number cross-reference is a model-selection starting point, not a blanket device guarantee. Final fit depends on the exact device, firmware or OS, target port and requested coding profile.

Link and application reference

See Where This Product Fits in the Network

Review common data-center, DCI, campus, server and metro-network connections before confirming speed, reach, fiber type and connector.

Application planning

Optical Transceiver Application and Link Map

Compare representative network topologies and link paths to identify the appropriate product family for the intended deployment.

View full application diagram
Optical transceiver application diagram covering data center, DCI, campus, server and metro networks
Testing and quality reference

Review the Quality-Control and Test Flow

Follow the checkpoints used to verify materials, firmware, optical performance, temperature stability, compatibility and final inspection.

Testing and quality

Quality Control and Test Flow

Review the sequence from material verification and firmware programming through optical, temperature, compatibility and final QA inspection.

View full testing diagram
Quality control flow covering material, firmware, optical, temperature, compatibility and final QA checks
Product FAQ

Frequently Asked Questions

Answers to common compatibility, installation and troubleshooting questions.

Is the optical power of a compatible transceiver different from the OEM version?

A compatible replacement should meet the applicable transmit-power and receiver-sensitivity specifications for the interface it is designed to support.

Why does the switch report a vendor or part number different from the physical transceiver label?

Compatible transceivers may contain programmed identification information required by the host platform. The vendor or part number reported by the switch can therefore differ from the manufacturer's physical product label.

What does an “unsupported transceiver” message mean?

It usually means the host device does not recognize or approve the identification information stored in the module. It does not necessarily indicate an optical failure.

How can I verify compatibility before ordering?

Check the network-device manufacturer and model, port type, required data rate, OEM transceiver reference if available, wavelength, reach, connector, fiber type, and software or firmware version when relevant.

Why does replacing an OEM transceiver with a compatible transceiver result in no link?

First verify that the compatible replacement matches the OEM module's form factor, data rate, wavelength, reach, fiber type, connector, and interface standard. Then confirm that it has the correct compatibility coding for the host platform.

Request a quote

Tell Us What Your Project Needs

Engineering resources

Technical proof for faster project review

Move from model selection to internal approval with the documents, compatibility checks and verification paths buyers use most.