Fiberland
Request a Quote
400G QSFP-DD, QSFP112, OSFP AOC

400G OSFP TO OSFP AOC

Rate400GCommon selectable lengths1m / 1.5m / 2m / 3m / 5m / 7m / 10m / 15m / 20m / 30m / 50m / 70m / 100mWavelength850NMInterface-
Fiberland part number
FLD-4OSFP-AOC-X
Unit priceAsk Our Manager
Request a Quote Review Specifications
At a glance

Key Specifications

Select a specification to see how it affects model selection.

View complete table
Form TypeOSFP

Check this recorded value against the target device and project requirements before quotation approval.

Model data

Technical Specifications

Filter the product record by the information needed for engineering or purchasing review.

14 specifications shown
Fiberland Part NumberFLD-4OSFP-AOC-XVendor NameFIBERLAND
Data Rate400GWavelength850NM
Common selectable lengths1m / 1.5m / 2m / 3m / 5m / 7m / 10m / 15m / 20m / 30m / 50m / 70m / 100mForm TypeOSFP
Optical Interface-DDM SupportYES
Commercial Temp.0~70℃Industrial Temp.-
Compatible BrandsCisco,Huawei,Nvidia...200+ brandsComplianceCE,FCC,ROHS,REACH
Warranty3 YearsModeMM
Compatible model reference

Product Compatibility Mapping

Cross-reference the original manufacturer part number with the corresponding Fiberland part number before confirming the target device and firmware.

Search Full Compatibility Database
Verified cross-references9 manufacturer part numbersAcross 1 brand
Showing 8 of 9 verified matches

Swipe horizontally to view every field.

Original part numberBrandFiberland part numberProduct description
AOC-O-O-400G-1MARISTAFLD-4OSFP-AOC-X400G OSFP to OSFP active optical cable, 1 m.
AOC-O-O-400G-3MARISTAFLD-4OSFP-AOC-X400G OSFP to OSFP active optical cable, 3 m.
AOC-O-O-400G-5MARISTAFLD-4OSFP-AOC-X400G OSFP to OSFP active optical cable, 5 m.
AOC-O-O-400G-7MARISTAFLD-4OSFP-AOC-X400G OSFP to OSFP active optical cable, 7 m.
AOC-O-O-400G-10MARISTAFLD-4OSFP-AOC-X400G OSFP to OSFP active optical cable, 10 m.
AOC-O-O-400G-15MARISTAFLD-4OSFP-AOC-X400G OSFP to OSFP active optical cable, 15 m.
AOC-O-O-400G-20MARISTAFLD-4OSFP-AOC-X400G OSFP to OSFP active optical cable, 20 m.
AOC-O-O-400G-25MARISTAFLD-4OSFP-AOC-X400G OSFP to OSFP active optical cable, 25 m.

A part-number cross-reference is a model-selection starting point, not a blanket device guarantee. Final fit depends on the exact device, firmware or OS, target port and requested coding profile.

Link and application reference

See Where This Product Fits in the Network

Review common data-center, DCI, campus, server and metro-network connections before confirming speed, reach, fiber type and connector.

Application planning

Optical Transceiver Application and Link Map

Compare representative network topologies and link paths to identify the appropriate product family for the intended deployment.

View full application diagram
Optical transceiver application diagram covering data center, DCI, campus, server and metro networks
Testing and quality reference

Review the Quality-Control and Test Flow

Follow the checkpoints used to verify materials, firmware, optical performance, temperature stability, compatibility and final inspection.

Testing and quality

Quality Control and Test Flow

Review the sequence from material verification and firmware programming through optical, temperature, compatibility and final QA inspection.

View full testing diagram
Quality control flow covering material, firmware, optical, temperature, compatibility and final QA checks
Product FAQ

Frequently Asked Questions

Answers to common compatibility, installation and troubleshooting questions.

Can different transceiver brands be used at opposite ends of a fiber link?

Yes. The transceivers do not normally need to be from the same manufacturer. Their Ethernet standard, wavelength, fiber type, lane configuration, reach, and other link requirements must be compatible.

Can compatible transceivers be used for 100G, 400G, and 800G networks?

Yes. Compatible modules are available across many high-speed interfaces, although compatibility requirements become increasingly platform-specific at higher data rates.

Are compatible transceivers suitable for enterprise networks?

Yes. They can be used in enterprise switching, routing, storage, campus networks, and other applications when properly matched to the network equipment and link requirements.

Can compatible transceivers be used with existing fiber cabling?

Yes, provided the module's fiber requirements match the installed cabling, including single-mode or multimode fiber, connector type, wavelength, and supported transmission distance.

Why is the transceiver recognized but DDM/DOM information is missing?

The module may be recognized while diagnostic monitoring is not fully supported by the host platform or compatibility profile. Check whether both the transceiver and network device support DDM/DOM for that interface.

Request a quote

Tell Us What Your Project Needs

Engineering resources

Technical proof for faster project review

Move from model selection to internal approval with the documents, compatibility checks and verification paths buyers use most.