Select a specification to see how it affects model selection.
Check this recorded value against the target device and project requirements before quotation approval.
Filter the product record by the information needed for engineering or purchasing review.
| Vendor Name | Fiberland | Form Type | BIDI SFP |
|---|---|---|---|
| Data Rate | 155M | Wavelength | 1310/1550NM,1490/1550NM |
| Available reaches | 10km / 20km / 40km / 60km / 80km / 100km / 120km / 160km / 180km / 200km | Optical Interface | SC/LC |
| Media Type | SM | DDM Support | Optional |
| Commercial Temp. | 0~70℃ | Industrial Temp. | -40~85℃ |
| Compatible Brands | Cisco,HP,Huawei,etc... | Certificates | CE,FCC,ROHS,REACH |
| HS Code | 8517706000 | Warranty | 3 Years |
Choose one listed value to view only the part numbers recorded for that distance.
| Fiberland part number | Rate | Media | Wavelength | Exact reach | Connector |
|---|---|---|---|---|---|
| FLD-S155-SMS-10 | 155Mbps | SM | 1310/1550NM | 10KM | LC/SC |
| FLD-S155-SMS-20 | 155Mbps | SM | 1310/1550NM | 20KM | LC/SC |
| FLD-S155-SMS-40 | 155Mbps | SM | 1310/1550NM | 40KM | LC/SC |
| FLD-S155-SMS-60 | 155Mbps | SM | 1490/1550NM | 60KM | LC/SC |
| FLD-S155-SMS-80 | 155Mbps | SM | 1490/1550NM | 80KM | LC/SC |
| FLD-S155-SMS-100 | 155Mbps | SM | 1490/1550NM | 100KM | LC/SC |
| FLD-S155-SMS-120 | 155Mbps | SM | 1490/1550NM | 120KM | LC/SC |
| FLD-S155-SMS-160 | 155Mbps | SM | 1490/1550NM | 160KM | LC/SC |
| FLD-S155-SMS-180 | 155Mbps | SM | 1490/1550NM | 180KM | LC/SC |
| FLD-S155-SMS-200 | 155Mbps | SM | 1490/1550NM | 200KM | LC/SC |
10 model options shown.
Cross-reference the original manufacturer part number with the corresponding Fiberland part number before confirming the target device and firmware.
Send the target device brand, model, firmware or OS and port details for an exact compatibility review.
A part-number cross-reference is a model-selection starting point, not a blanket device guarantee. Final fit depends on the exact device, firmware or OS, target port and requested coding profile.
Review common data-center, DCI, campus, server and metro-network connections before confirming speed, reach, fiber type and connector.
Compare representative network topologies and link paths to identify the appropriate product family for the intended deployment.
Follow the checkpoints used to verify materials, firmware, optical performance, temperature stability, compatibility and final inspection.
Review the sequence from material verification and firmware programming through optical, temperature, compatibility and final QA inspection.
Answers to common compatibility, installation and troubleshooting questions.
This can occur when the EEPROM compatibility profile does not match the intended interface or when the host interprets the programmed identification differently. Verify the module coding and corresponding OEM reference.
Compatible transceivers may contain programmed identification information required by the host platform. The vendor or part number reported by the switch can therefore differ from the manufacturer's physical product label.
Abnormal temperature, voltage, TX power, RX power, or bias-current readings may indicate an optical or hardware issue, but they can also result from incorrect calibration or communication between the compatible module and host device.
The module may be recognized while diagnostic monitoring is not fully supported by the host platform or compatibility profile. Check whether both the transceiver and network device support DDM/DOM for that interface.
Different switch models, hardware revisions, operating systems, and firmware versions may use different transceiver validation rules. A module compatible with one platform may require different coding for another.
Move from model selection to internal approval with the documents, compatibility checks and verification paths buyers use most.
01Technical filesFind model-level specifications, drawings and selection documents before internal review.
Find datasheets
02Device fitReview device, firmware and coding fit before specifying a module for your network.
Check compatibility
03VerificationSee optical, functional and pre-shipment checks used to verify product performance.
Review testing
04Project approvalReview certification routes and request supporting documents for project approval.
View documents