Select a specification to see how it affects model selection.
Check this recorded value against the target device and project requirements before quotation approval.
Filter the product record by the information needed for engineering or purchasing review.
| Vendor Name | Fiberland | Form Type | GBIC |
|---|---|---|---|
| Data Rate | 1.25Gbps | Wavelength | 850/1310/1550nm |
| Available reaches | 550m / 20km / 40km / 80km | Optical Interface | SC |
| Media Type | MM/SM | DDM Support | YES |
| Commercial Temp. | 0~70℃ | Industrial Temp. | -40~85℃ |
| Compatible Brands | Cisco,HP,Huawei,etc... | Certificates | CE,FCC,ROHS,REACH |
| HS Code | 8517706000 | Warranty | 3 Years |
Choose one listed value to view only the part numbers recorded for that distance.
| Fiberland part number | Rate | Media | Wavelength | Exact reach | Connector |
|---|---|---|---|---|---|
| FLD-GBIC-MMD-1 | 1.25Gbps | MM | 850NM | 550M | SC |
| FLD-GBIC-SMD-20 | 1.25Gbps | SM | 1310NM | 20KM | SC |
| FLD-GBIC-SMD-40 | 1.25Gbps | SM | 1310NM | 40KM | SC |
| FLD-GBIC-SMD-80 | 1.25Gbps | SM | 1550NM | 80KM | SC |
| FLD-GBIC-SMS-20 | 1.25Gbps | SM | 1310/1550NM | 20KM | SC |
| FLD-GBIC-SMS-40 | 1.25Gbps | SM | 1310/1550NM | 40KM | SC |
| FLD-GBIC-SMS-80 | 1.25Gbps | SM | 1490/1550NM | 80KM | SC |
| FLD-CGBIC-40 | 1.25Gbps | SM | 1270~1610NM | 40KM | SC |
| FLD-CGBIC-80 | 1.25Gbps | SM | 1270~1610NM | 80KM | SC |
9 model options shown.
Cross-reference the original manufacturer part number with the corresponding Fiberland part number before confirming the target device and firmware.
Send the target device brand, model, firmware or OS and port details for an exact compatibility review.
A part-number cross-reference is a model-selection starting point, not a blanket device guarantee. Final fit depends on the exact device, firmware or OS, target port and requested coding profile.
Review common data-center, DCI, campus, server and metro-network connections before confirming speed, reach, fiber type and connector.
Compare representative network topologies and link paths to identify the appropriate product family for the intended deployment.
Follow the checkpoints used to verify materials, firmware, optical performance, temperature stability, compatibility and final inspection.
Review the sequence from material verification and firmware programming through optical, temperature, compatibility and final QA inspection.
Answers to common compatibility, installation and troubleshooting questions.
Each transceiver must be compatible with its own host device. In a mixed-vendor link, one end may be correctly coded while the transceiver at the opposite end is not fully compatible with its switch or router.
The device may reject the module, display an unsupported-transceiver warning, fail to establish a link, or provide incomplete monitoring information.
A compatible replacement should meet the applicable transmit-power and receiver-sensitivity specifications for the interface it is designed to support.
Some network devices validate vendor information stored in the transceiver EEPROM. If the module's coding is not recognized by the host platform, the switch may display an unsupported or non-certified transceiver warning.
Check whether the host correctly identifies the transceiver first. If the module is rejected, incorrectly identified, or generates vendor-related warnings, investigate compatibility. If it is correctly recognized but the link remains down, investigate fiber, optical power, wavelength, FEC, polarity, and the remote endpoint.
Move from model selection to internal approval with the documents, compatibility checks and verification paths buyers use most.
01Technical filesFind model-level specifications, drawings and selection documents before internal review.
Find datasheets
02Device fitReview device, firmware and coding fit before specifying a module for your network.
Check compatibility
03VerificationSee optical, functional and pre-shipment checks used to verify product performance.
Review testing
04Project approvalReview certification routes and request supporting documents for project approval.
View documents