Fiberland
Request a Quote
100G QSFP28 DAC

100G QSFP28 Direct Attach Copper Cable 5m | FLD-Q28-DAC-5M | Fiberland

100G QSFP28 TO QSFP28 5m

Rate100GReach5mWavelength-Interface-
Fiberland part number
FLD-Q28-DAC-5M
Unit priceAsk Our Manager
Request a Quote Review Specifications
At a glance

Key Specifications

Select a specification to see how it affects model selection.

View complete table
Form TypeQSFP28

Check this recorded value against the target device and project requirements before quotation approval.

Model data

Technical Specifications

Filter the product record by the information needed for engineering or purchasing review.

14 specifications shown
Fiberland Part NumberFLD-Q28-DAC-5MVendor NameFIBERLAND
Data Rate100GWavelength-
Reach5mForm TypeQSFP28
Optical Interface-DDM Support-
Commercial Temp.0~70℃Industrial Temp.-
Compatible BrandsCisco,Huawei,Nvidia...200+ brandsComplianceCE,FCC,ROHS,REACH
Warranty3 YearsMode-
Compatible model reference

Product Compatibility Mapping

Cross-reference the original manufacturer part number with the corresponding Fiberland part number before confirming the target device and firmware.

Search Full Compatibility Database
Verified cross-references15 manufacturer part numbersAcross 9 brands
Showing 8 of 15 verified matches

Swipe horizontally to view every field.

Original part numberBrandFiberland part numberProduct description
QSFP-100G-CU5MCISCOFLD-Q28-DAC-5M100G QSFP28 to QSFP28 passive direct-attach copper cable, 5 m.
CAB-Q-Q-100G-5MARISTAFLD-Q28-DAC-5M100G QSFP28 to QSFP28 passive direct-attach copper cable, 5 m.
JNP-100G-DAC-5MJUNIPERFLD-Q28-DAC-5M100G QSFP28 to QSFP28 passive direct-attach copper cable, 5 m.
740-061002JUNIPERFLD-Q28-DAC-5M100G QSFP28 to QSFP28 passive direct-attach copper cable, 5 m.
MCP1600-C005AMNVIDIAFLD-Q28-DAC-5M100G QSFP28 to QSFP28 passive direct-attach copper cable, 5 m.
MCP1600-C005E26LNVIDIAFLD-Q28-DAC-5M100G QSFP28 to QSFP28 passive direct-attach copper cable, 5 m.
R0Z26AHPE ARUBAFLD-Q28-DAC-5M100G QSFP28 to QSFP28 passive direct-attach copper cable, 5 m.
R9F78AHPEFLD-Q28-DAC-5M100G QSFP28 to QSFP28 passive direct-attach copper cable, 5 m.

A part-number cross-reference is a model-selection starting point, not a blanket device guarantee. Final fit depends on the exact device, firmware or OS, target port and requested coding profile.

Link and application reference

See Where This Product Fits in the Network

Review common data-center, DCI, campus, server and metro-network connections before confirming speed, reach, fiber type and connector.

Application planning

Optical Transceiver Application and Link Map

Compare representative network topologies and link paths to identify the appropriate product family for the intended deployment.

View full application diagram
Optical transceiver application diagram covering data center, DCI, campus, server and metro networks
Testing and quality reference

Review the Quality-Control and Test Flow

Follow the checkpoints used to verify materials, firmware, optical performance, temperature stability, compatibility and final inspection.

Testing and quality

Quality Control and Test Flow

Review the sequence from material verification and firmware programming through optical, temperature, compatibility and final QA inspection.

View full testing diagram
Quality control flow covering material, firmware, optical, temperature, compatibility and final QA checks
Product FAQ

Frequently Asked Questions

Answers to common compatibility, installation and troubleshooting questions.

How can I verify compatibility before ordering?

Check the network-device manufacturer and model, port type, required data rate, OEM transceiver reference if available, wavelength, reach, connector, fiber type, and software or firmware version when relevant.

Does MSA compliance guarantee switch compatibility?

No. MSA compliance helps ensure standardized physical and electrical interfaces, but individual equipment vendors may also use platform-specific identification or validation requirements.

Does the OEM part number need to match exactly?

The exact OEM reference is useful for identifying compatibility, but the optical specifications and host-platform requirements must also match the intended application.

Why does replacing an OEM transceiver with a compatible transceiver result in no link?

First verify that the compatible replacement matches the OEM module's form factor, data rate, wavelength, reach, fiber type, connector, and interface standard. Then confirm that it has the correct compatibility coding for the host platform.

What is the difference between equipment compatibility and optical compatibility?

Equipment compatibility determines whether the host device recognizes and operates with the module. Optical compatibility determines whether the two ends of the fiber link can communicate correctly. A successful deployment requires both.

Request a quote

Tell Us What Your Project Needs

Engineering resources

Technical proof for faster project review

Move from model selection to internal approval with the documents, compatibility checks and verification paths buyers use most.