1G DWDM SFP

1.25G DWDM SFP Fiber Optic Transceiver Module CH17~CH61 80km Duplex LC SMF DDM | FLD-GD-CHXX-80 | Fiberland

1.25G DWDM SFP Duplex 80km

Rate1.25GReach80kmWavelengthCH17~CH61InterfaceDUPLEX LC
Fiberland part number
FLD-GD-CHXX-80
Unit price95.00USD / piece

Key Specifications

Select a specification to see how it affects model selection.

View complete table
Form TypeDWDM SFP

Check this recorded value against the target device and project requirements before quotation approval.

Technical Specifications

Filter the product record by the information needed for engineering or purchasing review.

14 specifications shown
Fiberland Part NumberFLD-GD-CHXX-80Vendor NameFIBERLAND
Data Rate1.25GWavelengthCH17~CH61
Reach80kmForm TypeDWDM SFP
Optical InterfaceDUPLEX LCDDM SupportYES
Commercial Temp.0~70℃Industrial Temp.-40~85℃
Compatible BrandsCisco,Huawei,Nvidia...200+ brandsComplianceCE,FCC,ROHS,REACH
Warranty3 YearsModeSM

Product Compatibility Mapping

Cross-reference the original manufacturer part number with the corresponding Fiberland part number before confirming the target device and firmware.

Search Full Compatibility Database
Verified cross-references40 manufacturer part numbersAcross 1 brand
Showing 8 of 40 verified matches

Swipe horizontally to view every field.

Original part numberBrandFiberland part numberProduct description
DWDM-SFP-6141CISCOFLD-GD-CHXX-80Cisco 1000BASE-DWDM SFP transceiver, ITU channel 20 at 1561.42 nm, 80 km over single-mode fiber, dual LC/PC, with DOM.
DWDM-SFP-6061CISCOFLD-GD-CHXX-80Cisco 1000BASE-DWDM SFP transceiver, ITU channel 21 at 1560.61 nm, 80 km over single-mode fiber, dual LC/PC, with DOM.
DWDM-SFP-5979CISCOFLD-GD-CHXX-80Cisco 1000BASE-DWDM SFP transceiver, ITU channel 22 at 1559.79 nm, 80 km over single-mode fiber, dual LC/PC, with DOM.
DWDM-SFP-5898CISCOFLD-GD-CHXX-80Cisco 1000BASE-DWDM SFP transceiver, ITU channel 23 at 1558.98 nm, 80 km over single-mode fiber, dual LC/PC, with DOM.
DWDM-SFP-5817CISCOFLD-GD-CHXX-80Cisco 1000BASE-DWDM SFP transceiver, ITU channel 24 at 1558.17 nm, 80 km over single-mode fiber, dual LC/PC, with DOM.
DWDM-SFP-5736CISCOFLD-GD-CHXX-80Cisco 1000BASE-DWDM SFP transceiver, ITU channel 25 at 1557.36 nm, 80 km over single-mode fiber, dual LC/PC, with DOM.
DWDM-SFP-5655CISCOFLD-GD-CHXX-80Cisco 1000BASE-DWDM SFP transceiver, ITU channel 26 at 1556.55 nm, 80 km over single-mode fiber, dual LC/PC, with DOM.
DWDM-SFP-5575CISCOFLD-GD-CHXX-80Cisco 1000BASE-DWDM SFP transceiver, ITU channel 27 at 1555.75 nm, 80 km over single-mode fiber, dual LC/PC, with DOM.

A part-number cross-reference is a model-selection starting point, not a blanket device guarantee. Final fit depends on the exact device, firmware or OS, target port and requested coding profile.

See Where This Product Fits in the Network

Review common data-center, DCI, campus, server and metro-network connections before confirming speed, reach, fiber type and connector.

Application planning

Optical Transceiver Application and Link Map

Compare representative network topologies and link paths to identify the appropriate product family for the intended deployment.

View full application diagram
Optical transceiver application diagram covering data center, DCI, campus, server and metro networks

Review the Quality-Control and Test Flow

Follow the checkpoints used to verify materials, firmware, optical performance, temperature stability, compatibility and final inspection.

Testing and quality

Quality Control and Test Flow

Review the sequence from material verification and firmware programming through optical, temperature, compatibility and final QA inspection.

View full testing diagram
Quality control flow covering material, firmware, optical, temperature, compatibility and final QA checks

Frequently Asked Questions

Answers to common compatibility, installation and troubleshooting questions.

Why does my switch detect the transceiver but not establish a link?

Possible causes include incorrect fiber type, wavelength mismatch, polarity, dirty connectors, excessive optical loss, incompatible link partners, FEC settings, port configuration, or compatibility issues.

What does an “unsupported transceiver” message mean?

It usually means the host device does not recognize or approve the identification information stored in the module. It does not necessarily indicate an optical failure.

What happens if a transceiver has the wrong compatibility coding?

The device may reject the module, display an unsupported-transceiver warning, fail to establish a link, or provide incomplete monitoring information.

Can one optical transceiver be compatible with multiple brands?

Yes. The same optical hardware may support multiple equipment brands when it is programmed with the appropriate compatibility profile. Multi-vendor coding options may also be available for certain applications.

Does the OEM part number need to match exactly?

The exact OEM reference is useful for identifying compatibility, but the optical specifications and host-platform requirements must also match the intended application.

Tell Us What Your Project Needs

Engineering resources

Technical proof for faster project review

Move from model selection to internal approval with the documents, compatibility checks and verification paths buyers use most.