Select a specification to see how it affects model selection.
Check this recorded value against the target device and project requirements before quotation approval.
Filter the product record by the information needed for engineering or purchasing review.
| Vendor Name | Fiberland | Form Type | Copper SFP |
|---|---|---|---|
| Data Rate | 155M,1.25G,10G | Wavelength | N/A |
| Available reaches | 30m / 80m / 100m | Optical Interface | RJ45 |
| Media Type | N/A | DDM Support | N/A |
| Commercial Temp. | 0~70℃ | Industrial Temp. | -40~85℃ |
| Compatible Brands | Cisco,HP,Huawei,etc... | Certificates | CE,FCC,ROHS,REACH |
| HS Code | 8517706000 | Warranty | 3 Years |
Choose one listed value to view only the part numbers recorded for that distance.
| Fiberland part number | Rate | Media | Wavelength | Exact reach | Connector |
|---|---|---|---|---|---|
| FLD-S155-T | 100M | N/A | N/A | 100M | RJ45 |
| FLD-SG-T | 1000M | N/A | N/A | 100M | RJ45 |
| FLD-SASG-T | 10/100/1000M | N/A | N/A | 100M | RJ45 |
| FLD-10G-T-30M | 10G | N/A | N/A | 30M | RJ45 |
| FLD-10G-T-80M | 10G | N/A | N/A | 80M | RJ45 |
| FLD-AS10G-T-30M | 10/100/1000/10000M | N/A | N/A | 30M | RJ45 |
| FLD-AS10G-T-80M | 10/100/1000/10000M | N/A | N/A | 80M | RJ45 |
7 model options shown.
Cross-reference the original manufacturer part number with the corresponding Fiberland part number before confirming the target device and firmware.
Send the target device brand, model, firmware or OS and port details for an exact compatibility review.
A part-number cross-reference is a model-selection starting point, not a blanket device guarantee. Final fit depends on the exact device, firmware or OS, target port and requested coding profile.
Review common data-center, DCI, campus, server and metro-network connections before confirming speed, reach, fiber type and connector.
Compare representative network topologies and link paths to identify the appropriate product family for the intended deployment.
Follow the checkpoints used to verify materials, firmware, optical performance, temperature stability, compatibility and final inspection.
Review the sequence from material verification and firmware programming through optical, temperature, compatibility and final QA inspection.
Answers to common compatibility, installation and troubleshooting questions.
It usually means the host device does not recognize or approve the identification information stored in the module. It does not necessarily indicate an optical failure.
Most SFP-family, QSFP-family, and similar pluggable transceivers are designed for hot-pluggable operation according to the applicable interface specification. Host-equipment procedures should still be followed.
Compatibility is typically achieved through EEPROM programming, identification parameters, interface compliance, and platform-specific coding so that the host device can correctly recognize and communicate with the transceiver.
Yes. Forward Error Correction is an important consideration for many 25G, 50G, 100G, 200G, 400G, and 800G interfaces. Both ends of the link must use compatible FEC and interface settings.
FEC errors may result from incompatible FEC settings, excessive optical loss, signal-quality problems, incorrect fiber infrastructure, or incompatible link parameters. Verify that both ends use the required FEC mode for the interface.
Move from model selection to internal approval with the documents, compatibility checks and verification paths buyers use most.
01Technical filesFind model-level specifications, drawings and selection documents before internal review.
Find datasheets
02Device fitReview device, firmware and coding fit before specifying a module for your network.
Check compatibility
03VerificationSee optical, functional and pre-shipment checks used to verify product performance.
Review testing
04Project approvalReview certification routes and request supporting documents for project approval.
View documents