Quick Answer
Start with the target device, port, link distance, fiber type and document needs. Then use the article content below to narrow the model path before sending an RFQ.
XENPAK is a multisource agreement (MSA) for a 10 Gigabit Ethernet (10GbE) transceiver package. It's the oldest 10G fiber optic transceiver. XENPAK transceivers is designed with XAUI interface and Digital Diagnostic Monitor Interface, which comply with the XENPAK MSA protocol and satisfy the application of 802.3ae Ethernet protocol 10GB. XENPAK transceivers are supplied for physical layer interfaces supporting multi-mode and single mode fiber optic cables and InfiniBand copper cables with connectors like as CX4. Transmission distances vary from 100 metres (330 ft) to 80 kilometres (50 mi) on fiber and up to 15 metres (49 ft) on CX4 cable. Newer XENPAKs using the 10GBase-LX4 standard operated using multiple wavelengths on legacy multi-mode fibres at distances of up to 300 metres (980 ft), eliminating the need to reinstall cable in a building when upgrading certain 1 Gbit/s circuits to 10 Gbit/s. The XENPAK form factor was initially supported by numerous network equipment manufacturers and transceiver optics vendors. However, advances in technology led to more compact form factors for 10 Gigabit Ethernet applications. Soon after the standard was introduced in 2001, two related standards emerged: XPAK and X2. These two standards have the same electrical interface as XENPAK (known as XAUI) but a smaller mechanical properties. XENPAK was replaced by X2 or SFP+ transceiver that providing higher port density and most of the transceiver vendors stop to provide to market. Nowadays,however,there is quite few ethernet switch or routers with Xenpak port worked, a Xenpak to SFP+ converters was produced to meet the needs. Types of XENPAK Classified by Applications: XENPAK CWDM,XENPAK DWDM,Dual fiber XENPAK, XENPAK BIDI Classified by Distance: CX4 for 15m on copper, SR for 300m,LRM for 220m, LR for 10km or 20km, ER for 40km, ZR for 80km. SFP+ module , SFP+ transceiver , bidi sfp , XFP module , XFP transceiver Which is good? First choice Fiberland!Thanks for your concern, to learn more about Fiberland, please enter Fiberland website: http://www.fiberlandtec.com/
Compatibility Checklist
Before requesting pricing, collect the details that affect coding review and quote quality.
Device information
Device brand, model, firmware or OS version, target port and required module code.
Link information
Required reach, fiber type, connector, wavelength plan and deployment environment.
Purchase context
Quantity, destination country, required delivery target and packaging or labeling needs.
Proof documents
Datasheet, catalog, test report request, certificate path or inspection record requirement.
FAQ
What information is needed for compatibility review?
Submit brand, device model, firmware or OS, target port, required module code and quantity.
Can I request a datasheet before ordering?
Yes. Use the datasheet center or RFQ form to request the current file version for the target model.
What should I include in an RFQ?
Product variant, quantity, country, target device, reach, connector, required documents and deployment notes.
Where can I review testing or compliance paths?
Use the Testing & Quality and Certifications & Compliance pages, then request project documents through the RFQ.