Quick Answer
Start with the target device, port, link distance, fiber type and document needs. Then use the article content below to narrow the model path before sending an RFQ.
An optical module seems simple, but it's actually going through a fairly long cycle of work. The components of the optical transceiver include optical devices, optical interface and PCBA. Today we will share how to make a good quality PCBA. The following tests are required for a high quality PCBA: （1）Impedance verification Verify the impedance of the attached line or transferring line on circuit board, impedance discontinuity resolution as low as 2mm. （2）Loss test Test the insertion loss and return loss of the passive channel on the circuit board, and crosstalk between the transmission lines. （3）Eye diagram test Test passive channel response, or test transmitter signal quality. （4）BER test Test bit error rate level of serial channel, can test the influence of jitter tolerance of receiver or multi-channel crosstalk on the bit error rate when external loopback. （5）Conformance test For common high-speed serial buses, such as PCIe, SATA/SAS and so on, to do the conformance test at the transmitter end. XFP module , XFP transceiver , bidi sfp , SFP+ module , SFP+ transceiver Which is good? First choice Fiberland！Thanks for your concern, to learn more about Fiberland, please enter Fiberland website: http://www.fiberlandtec.com/
Compatibility Checklist
Before requesting pricing, collect the details that affect coding review and quote quality.
Device information
Device brand, model, firmware or OS version, target port and required module code.
Link information
Required reach, fiber type, connector, wavelength plan and deployment environment.
Purchase context
Quantity, destination country, required delivery target and packaging or labeling needs.
Proof documents
Datasheet, catalog, test report request, certificate path or inspection record requirement.
FAQ
What information is needed for compatibility review?
Submit brand, device model, firmware or OS, target port, required module code and quantity.
Can I request a datasheet before ordering?
Yes. Use the datasheet center or RFQ form to request the current file version for the target model.
What should I include in an RFQ?
Product variant, quantity, country, target device, reach, connector, required documents and deployment notes.
Where can I review testing or compliance paths?
Use the Testing & Quality and Certifications & Compliance pages, then request project documents through the RFQ.