How to Remove a GBIC Transceiver Module with Handle or Clips?

Before removing a GBIC Transceiver , please notice that because invisible laser radiation may be emitted from the aperture of the port when no cable is connected, avoid exposure to laser radiation and do not stare into open apertures. Removing a GBIC with Clips If you are removing a GBIC that has clips, perform these steps: Step 1 Disconnect the network fiber cable from the GBIC SC-type connector. Step 2 Release the GBIC from the slot by simultaneously squeezing the two plastic tabs (one on each side of the GBIC). Step 3 Slide the GBIC out of the Gigabit Ethernet module slot. A flap drops down to protect the Gigabit Ethernet module connector. Step 4 Place the GBIC in an antistatic bag. Removing a GBIC with a Handle If you are removing a GBIC with a handle, perform these steps: Step 1 Disconnect the network fiber-optic cable from the GBIC SC-type connector. Step 2 Rotate the handle up to release the GBIC from the slot. Step 3 Grip the handle or the sides of the GBIC and slide the GBIC out of the slot. A flap drops down to protect the slot. Step 4 Place the GBIC in an antistatic bag. SFP+ module , SFP+ transceiver , bidi sfp , XFP module , XFP transceiver Which is good? First choice Fiberland！Thanks for your concern, to learn more about Fiberland, please enter Fiberland website: http://www.fiberlandtec.com/