How to control the quality of optical transceiver?

Quality is very important for all products, such as optical Transceiver, only maintain the good quality, the products can be got the trust from the customer , is it right ? To control the quality of the product,we will conduct some testing, including Material testing, Product parameter testing, Distance testing, Switch testing and Aging testing. Material testing Testing the material, such as TOSA, ROSA and BOSA, it can reduce reject rate. Product parameter testing Testing the module parameters, like output power, sensitivity, extinction ratio and eye diagram, the excellent parameter make the products working more steady. Distance testing For different transmission distance, our engineer will test the module by different meters of optical fiber, the customer no worried about loss pocket. Switch testing Insert the module on the switch to check the compatibility, we have some brands of switch, such as Cisco, HUAWEI, HP, Mikrotik, VOLKTEK, will buy more brands of switch future. Aging testing Install the module to the aging board , then working on it about 24 hours. The purpose of Aging testing: 1.Finding the failure product in advance before shipment 2.Prohibiting the faulty module to leave the factory 3.Decreasing reject rate 4.Guaranteeing the working stability of the products after leaving the factory XFP module , XFP transceiver , bidi sfp , SFP+ module , SFP+ transceiver Which is good? First choice Fiberland！Thanks for your concern, to learn more about Fiberland, please enter Fiberland website: http://www.fiberlandtec.com/