Quick Answer

Start with the target device, port, link distance, fiber type and document needs. Then use the article content below to narrow the model path before sending an RFQ.

Avago Technologies provide the 1×9 Fiber Optic Transceivers for telecom networking equipment manufacturers or ICT integrators at a quite high price, in order to meet the needs of cost down from them, Fiberland provides a wide range of equivalents to Avago 1×9 Fiber Optics. Those equivalents are high performance, RoHS compliant and with much lower cost than Avago, by this equivalent transceivers, the customer will save more than 40%. Here is the part number list of Avago 1×9 fiber optic transceivers including Fiberland equivalents, it will help you to find the right p/n to be your transceiver alternatives. Original P/N | Fiberland's P/N | Original Description | AFBR-5803Z | OPT155-312xSCR | 125 MBd MMF Transceiver for Fast Ethernet (100Base-FX)/ATM/FDDI, 1×9,RoHS Compliant,1300nm,2km,duplex SC receptacle | AFBR-5803TZ | OPT155-312xTCR | 125 MBd MMF Transceiver for Fast Ethernet (100Base-FX)/ATM/FDDI, 1×9,RoHS Compliant,1300nm,2km,duplex ST receptacle | AFBR-5803AZ | OPT155-312xSER | 125 MBd MMF Transceiver for Fast Ethernet (100Base-FX)/ATM/FDDI,1×9, Ext Temp (-10C to 85C), RoHS,1300nm,2km,duplex SC receptacle | AFBR-5803ATZ | OPT155-312xTER | 125 MBd MMF Transceiver for Fast Ethernet (100Base-FX)/ATM/FDDI,1×9, Ext Temp (-10C to 85C), RoHS,1300nm,2km,duplex ST receptacle | AFCT-5179BZ | OPT155-312xTCR | 125 MBd SMF Transceiver for Fast Ethernet (100Base-LX10), 1×9,Black, RoHS Compliant,1300nm,2km,duplex ST receptacle,Black Case | AFCT-5179DZ | OPT155-312xTCR | 125 MBd SMF Transceiver for Fast Ethernet (100Base-LX10), 1×9, Blue, RoHS Compliant,1300nm,2km,duplex ST receptacle,Blue Case | AFCT-5179AZ | OPT155-312xSTR | 125 MBd SMF Transceiver for Fast Ethernet (100Base-LX10), 1×9, Ext Temp (-40C to 85C) , Black,RoHS,1300nm,20km,duplex SC | AFCT-5179CZ | OPT155-312xSTR | 125 MBd SMF Transceiver for Fast Ethernet (100Base-LX10), 1×9, Ext Temp (-40C to 85C), Blue, RoHS,1300nm,20km,duplex SC | AFBR-5803AQZ | OPT155-3120xSTR | 125 MBd MMF Transceiver for Fast Ethernet (100Base-FX)/ATM/FDDI, 1×9, Ext Temp (-40C to 85C), RoHS,1300nm,20km,duplex SC | AFBR-5803ATQZ | OPT155-3120xSTR | 125 MBd MMF Transceiver for Fast Ethernet (100Base-FX)/ATM/FDDI, 1×9, Ext Temp (-40C to 85C), RoHS,1300nm,20km,duplex ST | AFBR-53D5FZ | OPT1250-8505xSCR | 1.25 GBd SMF Fiber Optic Transceiver for Gigabit Ethernet, 1×9, Flush Shield, RoHS Compliant,850nm,550m,duplex SC | AFBR-53D5Z | OPT1250-8505xSCR | 1.25 GBd SMF Fiber Optic Transceiver for Gigabit Ethernet, 1×9,RoHS Compliant,850nm,550m,duplex SC,No shield, plastic housing. | AFBR-53D5EZ | OPT1250-8505xSCR | 1.25 GBd SMF Fiber Optic Transceiver for Gigabit Ethernet, 1×9, Flush Shield, RoHS Compliant,850nm,550m,duplex SC,Extended/protruding shield, plastic housing. | HFBR-53A5VEMZ | OPT1250-8505xSCR | 1.25 GBd MMF Transceiver for Gigabit Ethernet, 1×9, Extended shield, Metal Housing, RoHS Compliant,3.3v,850nm,550m,duplex SC | HFBR-53A5VFMZ | OPT1250-8505xSCR | 1.25 GBd MMF Transceiver for Gigabit Ethernet, 1×9, Flush Shield, Metal Housing, RoHS Compliant,3.3v,850nm,550m,duplex SC | AFBR-5805TZ | OPT155-312xTCR | 155 MBd MMF Transceiver for ATM/SONET OC-3, 1×9, RoHS Compliant, 1300nm,2km,duplex ST connector interface | AFBR-5805Z | OPT155-312xSCR | 155 MBd MMF Transceiver for ATM/SONET OC-3, 1×9, RoHS Compliant,1300nm, 2km,duplex SC connector interface | AFBR-5805AZ | OPT155-312xSER | 155 MBd MMF Transceiver for ATM/SONET OC-3, 1×9, RoHS Compliant,Ext Temp (-10C to 85C),1300nm,2km,duplex SC connector interface | AFBR-5805ATZ | OPT155-312xTER | 155 MBd MMF Transceiver for ATM/SONET OC-3, 1×9, RoHS Compliant,Ext Temp (-10C to 85C),1300nm,2km,duplex ST connector interface | AFCT-5815AZ | OPT155-3120xSTR | 155 Mb/s Single Mode Fiber Optic Transceiver for ATM, SONET OC-3/SDH STM-1,1×9, Ext Temp (-40°C to +85°C),Black Case,RoHS Compliant,1300nm,20km,duplex SC connector interface | AFCT-5815BZ | OPT155-3120xSTR | 155 Mb/s Single Mode Fiber Optic Transceiver for ATM, SONET OC-3/SDH STM-1,1×9,Black Case,RoHS Compliant,1300nm,20km,duplex SC connector interface | AFCT-5815CZ | OPT155-3120xSCR | 155 Mb/s Single Mode Fiber Optic Transceiver for ATM, SONET OC-3/SDH STM-1,1×9,ExtTemp (-40°C to +85°C),Blue Case,RoHSCompliant,1300nm,20km,duplex SC connectorinterface | AFCT-5815DZ | OPT155-3120xSCR | 155 Mb/s Single Mode Fiber Optic Transceiver for ATM, SONET OC-3/SDH STM-1,1×9,Blue Case,RoHS Compliant,1300nm,20km,duplex SC connector interface | HFBR-5208AFMZ | OPT622-3105xSTR | 622 MBd MMF Transceiver for ATM/SONET OC-12, 1×9, Ext Temp (-40 to 85C), Flush Shield, Metallized Housing, RoHS Compliant, 1300nm,500m,duplex SC connector interface | HFBR-5208FMZ | OPT622-3105xSTR | 622 MBd MMF Transceiver for ATM/SONET OC-12, 1×9, Ext Temp (-40 to 85C), Flush Shield, Metallized Housing, RoHS Compliant, 1300nm,500m,duplex SC connector interface | HFBR-5208MZ | OPT622-3105xSCR | 622 MBd Multi Mode Fiber Optic Transceiver for 622 Mb/s ATM/SONET/SDH,1×9,No shield, metallized housing,RoHS Compliant,1300nm, 500m,duplex SC connector interface | HFBR-5208EMZ | OPT622-3105xSCR | 622 MBd Multi Mode Fiber Optic Transceiver for 622 Mb/s ATM/SONET/SDH,1×9, Extended/protruding shield, metallized housing, RoHS Compliant,1300nm,500m,duplex SC connector interface | HFBR-5208AEMZ | OPT622-3105xSTR | 622 MBd MMF Transceiver for ATM/SONET OC-12, 1×9, Ext Temp (-40 to 85C), Extended/protruding shield, metallized housing, RoHS Compliant,1300nm,500m,duplex SC connector interface |

Compatibility Checklist

Before requesting pricing, collect the details that affect coding review and quote quality.

Device information

Device brand, model, firmware or OS version, target port and required module code.

Link information

Required reach, fiber type, connector, wavelength plan and deployment environment.

Purchase context

Quantity, destination country, required delivery target and packaging or labeling needs.

Proof documents

Datasheet, catalog, test report request, certificate path or inspection record requirement.

FAQ

What information is needed for compatibility review?

Submit brand, device model, firmware or OS, target port, required module code and quantity.

Can I request a datasheet before ordering?

Yes. Use the datasheet center or RFQ form to request the current file version for the target model.

What should I include in an RFQ?

Product variant, quantity, country, target device, reach, connector, required documents and deployment notes.

Where can I review testing or compliance paths?

Use the Testing & Quality and Certifications & Compliance pages, then request project documents through the RFQ.